Features; Assembly - RIDGID R32021 Manuel D'utilisation

FEATURES

PRODUCT SPECIFICATIONS
Blade Diameter ....................................................... 7-1/4 in.
Blade Arbor ............................................................... 5/8 in.
Cutting Depth at 0° ................................................. 2-3/8 in.
Cutting Depth at 45° ............................................... 1-3/4 in.
KNOW YOUR CIRCULAR SAW
See Figure 1, page 15.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
BLADE WRENCH STORAGE
Blade wrench storage is located on saw housing below the
cord exit. The storage area can be accessed by adjusting
the saw to a bevel position.

ASSEMBLY

UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not properly
and completely assembled could result in serious
personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACKING LIST
7-1/4 in. Circular Saw
Blade
6 mm Blade Wrench
Operator's Manual
Cutting Depth at 51.5° ............................................ 1-5/8 in.
Input ..................................120 V, AC only, 60 Hz, 15 Amps
No Load Speed ..................................... 5,800 r/min. (RPM)
Net Weight .................................................................10 lbs.
DUST CHUTE
To direct saw dust and chips away from the operator, a dust
chute is located on the side of the upper blade guard.
ERGONOMIC DESIGN
The design provides comfort when operating in different
positions and at different angles.
FULL LENGTH KERF INDICATOR
Indicates blade position for more accurate cutting.
SPINDLE LOCK
The spindle lock allows you to secure the blade when turning
the blade screw.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of
this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
7 — English