Télécharger Imprimer la page

Beko CN151720 Mode D'emploi page 27

Masquer les pouces Voir aussi pour CN151720:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 58
7
Troubleshooting
Please review this list before calling the service. It will save your time and money. This list
includes frequent complaints that are not arising from defective workmanship or material
usage. Some of the features described here may not exist in your product.
The cooler/freezer does not operate.
The plug is not inserted into the socket correctly. >>>Insert the plug into the socket
securely.
The fuse of the socket which your cooler/freezer is connected to or the main fuse have
blown out. >>>Check the fuse.
Condensation on the side wall of the fridge compartment (MULTIZONE, COOL
CONTROL and FLEXI ZONE).
Ambient is very cold. >>>Do not install the cooler/freezer in places where the temperature
falls below 10 °C.
Door has been opened frequently. >>>Do not open and close the door of cooler/freezer
frequently.
Ambient is very humid. >>>Do not install your cooler/freezer into highly humid places.
Food containing liquid is stored in open containers. >>>Do not store food with liquid
content in open containers.
Door of the cooler/freezer is left ajar. >>>Close the door of the cooler/freezer.
Thermostat is set to a very cold level. >>>Set the thermostat to a suitable level.
Compressor is not running
Protective thermic of the compressor will blow out during sudden power failures or plug-
out plug-ins as the refrigerant pressure in the cooling system of the cooler/freezer has not
been balanced yet. The cooler/freezer will start running approximately after 6 minutes.
Please call the service if the cooler/freezer does not startup at the end of this period.
The fridge is in defrost cycle. >>>This is normal for a full-automatically defrosting cooler/
freezer. Defrosting cycle occurs periodically.
The cooler/freezer is not plugged into the socket. >>>Make sure that the plug is fit into the
socket.
Temperature settings are not made correctly. >>>Select the suitable temperature value.
There is a power outage. >>>Cooler/freezer returns to normal operation when the power
restores.
The operation noise increases when the cooler/freezer is running.
The operating performance of the cooler/freezer may change due to the changes in the
ambient temperature. It is normal and not a fault.
The cooler/freezer is running frequently or for a long time.
All manuals and user guides at all-guides.com
26
EN

Publicité

loading

Ce manuel est également adapté pour:

Cn151720dx