Assembly Directly To The Floor; Assembly Permanent Fixation - Extremis INUMBRA Manuel D'instructions

ASSEMBLY INUMBRA ASSEMBLY DIRECTLY TO THE FLOOR
WHAT YOU NEED
1 person
+/- 30 min.
ASSEMBLY INUMBRA WITH PERMANENT FIXATION
WHAT YOU NEED
1 person
+/- 60 min.
2. Dig a hole that is slightly less deep than the length of
tube you want to plant in the ground. Make sure the
tube is vertically level and correctly positioned at the
desired height. Fill the hole around the tube with a
sufficient amount of thick concrete to ensure that it is
firmly fixed. Allow sufficient time for the concrete to
set.
8 assembly inumbra with (permanent) fixation - assembly inumbra into arthur
1. Place the stainless steel tube where you want to place
the parasol and attach it to the floor using anchoring
bolts (or another type of fixing medium suitable for
your kind of floor).
2. Put the parasol on the stainless steel tube as explained
in point 6 - 7 - 8 on page 7.
1. Mark the spot where you wish to install the parasol
and dig a hole. Determine how much of the tube you
want to remain visible, taking into account the
parasol's open and closed position (see technical
sheet). The tube should be put into the floor to a depth
of at least 70 cm.
3. Put the parasol on the stainless steel tube as explained
in point 6 - 7 - 8 on page 7.