EYENIMAL SMALL PET FEEDER Guide D'utilisation page 12

Once you have gone through all these stages, fill the feed container with food and close the lid so that the Small Pet
Feeder can begin its first delivery.
To carry out manual delivery, you only have to press "SET" button and to keep pressing on the arrow button
4. Meal time programming and voice message
1) Activate the product:
•
Put the "ON/OFF" switch under the product on
position I.
2) Time setting:
•
Press the "SET" button for 2 seconds. The hour
display flashes.
•
Adjust the hour using the arrows.
•
Press SET to enter and then set the minutes.
•
Adjust the minutes using the arrows then press
SET to enter.
3) First meal setting:
•
Press the "SET" button for 2 seconds.
•
Go past the time setting by pressing the "SET"
button twice.
•
The number 1 displays the first meal. Once the
hour figure flashes on the screen, set the hour of
the time at which you wish to deliver the first
meal.
•
Having set the hour, set the minutes in the same
way.
•
Press the SET button to record the number of
portions for this meal.
4) Setting the number of portions:
A portion represents about 10g
•
The screen displays "P" with the number of
portions flashing behind it: press the arrow keys to
choose the number of portions for this meal.
•
Then press the "SET" button to set the 2
and so on up to the 12
5) Voice recording:
You can make a recording lasting up to 10 seconds.
•
Press and hold the "REC" button until the "MIC"
light shows.
•
Speak close to the microphone beside "MIC".
•
Once you have finished the recording, let go of the
"REC" button. The screen then shows that the
recording has been completed.
•
Press the PLAY button to play back the recording.
nd
meal
th
meal.
12