Vortice VORT HRW 30 MONO EVO Livret D'instructions page 27

ENGLISH
- Body with pre-assembled plug-in terminal block, frontal grille and aesthetic panel in polycarbonate (PC) tested
according to standard UNI EN ISO 11925-2:2010 and resulted in class E for reaction to fire (according to the EN
13501-1 standard).
- Motor holder and push-button panel in ABS material.
- 5-speed reversible EC fan.
- Integrated electronic board.
- Closing device (disk) sealing the front panel to prevent temperature changes in the winter months and the entry of
pollutants and odors from the outside.
- Washable internal filter with frame.
• Flange (2) wall mountable with pre-assembled terminal block.
• Terminal block cover with screw and cable gland (3).
• PVC pipe for installation inside walls with thickness from 260 mm (283 mm VORT HRW 40 MONO EVO) to 700 mm
(optional).
HRW 30 MONO EVO
• Storage type heat exchanger, made of ceramic material with external filter already assembled (4A)
• External ventilation grille (d.100 T10 RB) in plastic material, externally mountable. Grid equipped with anti-insect net (5A).
HRW 40 MONO EVO
• Storage type heat exchanger, made of ceramic material supplied with two expanded polyproylene (EPP) housings and it
is complete with a central gasket to prevent air infiltration (4B).
• Outer rubber grille (5B), which can be mounted externally with plugs or inserted internally through the hole in the wall
with no need for external scaffolding.
• Washable external filter with holder grids (x2) (6)
• Insect grid (7)
HRW 30 MONO EVO HCS / HRW 40 MONO EVO HCS
• Remote control (8).
HRW 30 MONO EVO
(1)
(3)
(5A)
(2)
(4A)
(8)
(versioni HCS)
HRW 40 MONO EVO
(1)
(2)
(5B)
(4B)
(7)
(8)
(versioni HCS)
(3)
(6)
27