Husqvarna 575XP AutoTune EPA I Manuel D'utilisation page 23

the bar before transporting the chain saw or carrying it for
any distance.
7 When you put the chain saw on the ground, lock the saw
chain using the chain brake and ensure you have a
constant view of the machine. Switch the engine off
before leaving your chain saw for any length of time.
General rules
1 If you understand what kickback is and how it happens
then you can reduce or eliminate the element of surprise.
By being prepared you reduce the risk. Kickback is
usually quite mild, but it can sometimes be very sudden
and violent.
2 Always hold the chain saw firmly with your right hand on
the rear handle and your left hand on the front handle.
Wrap your fingers and thumbs around the handles. You
should use this grip whether you are right-handed or left-
handed. This grip minimizes the effect of kickback and
lets you keep the chain saw under control. Do not let go
of the handles!
3 Most kickback accidents happen during limbing. Make
sure you are standing firmly and that there is nothing in
the way that might make you trip or lose your balance.
Lack of concentration can lead to kickback if the kickback
zone of the bar accidentally touches a branch, nearby
tree or some other object.
Have control over the workpiece. If the pieces you intend
to cut are small and light, they can jam in the saw chain
and be thrown towards you. Even if this does not need to
WORKING TECHNIQUES
be a danger, you may be surprised and lose control of
the saw. Never saw stacked logs or branches without first
separating them. Only saw one log or one piece at a
time. Remove the cut pieces to keep your working area
safe.
4 Never use the chain saw above shoulder height and
avoid cutting with the tip of the bar. Never use the
chain saw one-handed!
5 In order to keep control of your saw, always maintain a
firm foothold. Never work on a ladder, in a tree or on any
other insecure support.
6 Always use a fast cutting speed, i.e. full throttle.
7 Take great care when you cut with the top edge of the
bar, i.e. when cutting from the underside of the object.
This is known as cutting with a pushing chain. The chain
tries to push the chain saw back towards the user. If the
–
English 23