LaCimbali CONIK Manuel page 16

Table des Matières

Publicité

English
GENERAL
The manufacturer declines all responsibility for damages to
persons or things due to improper use.
Never use the appliance with wet hands or bare feet.
Ensure that the appliance is not used by children or persons who
have not been instructed in its correct use.
MACHINE CLOSE-DOWN
When the machine remains unattended for a
long period of time (at night, during the
weekly closing day or during holidays) the
!
following operations shall be performed:
- Switch off switch (11).
- Switch off the mains switch.
- Empty the coffee beans receptacle (2) and
the ground coffee doser (6)
Non-compliance with these safety measures
exonerates the manufacturer from all liability
for malfunctions or damage to persons or
things
THERMAL PROTECTOR
The thermal protector cuts in if the motor gets overheated due to
malfunction.
Allow the appliance to cool down before switching it on again.
If the problem is repeated, call the authorized servicing department.
Direct intervention by the customer
In order to avoid unnecessary costs, ensure that the problem occurring in the machine is not included in the following table before calling the
servicing department.
DEFECT
The appliance does not function and the
indicator light (10) is off.
The appliance does not work and the indicator
light (10) is on.
The appliance functions correctly but ground
coffee is not dispensed.
All manuals and user guides at all-guides.com
Caution
Malfunctions – Faults
CAUSE
No electricity.
Thermal protector has cut in.
Coffee beans receptacle gate (3) closed.
COFFEE STORAGE
Always use fresh coffee beans and store in jars or waterproof,
sealed bags. Keep away from light sources and store in a cool, dry
place.
Try to use up all the coffee in the doser at the end of the working day
since it can lose its aroma and spoil.
MAINTENANCE AND REPAIR
If the appliance does not function correctly, switch it off, turn off the
mains switch and call the servicing department.
Only qualified and authorized servicing personnel should be
called.
Use only original spare parts.
Maintenance activities performed by unqualified personnel may
jeopardize the safety of the machine.
If the electric cable is damaged, switch off the appliance and apply
to the servicing department for a replacement.
To ensure the safety of the operations and functions of the appliance
the following measures must be adhered to:
- Follow all the manufacturer’s instructions.
- Ensure that the machine is subjected to maintenance operations
performed by specialized personnel.
The following measures are indispensable for ensuring
operational and functional safety:
- Comply with all the manufacturer’s instructions.
!
- Ensure that specialized technicians periodically verify
that the protection devices are intact and that all the
safety devices function correctly (the first inspection
should be made within 3 years and subsequently once
yearly).
REMEDY
Check that the electricity is on.
Check the position of the mains switch (11).
Wait until the appliance has cooled down.
Pull the gate (3) towards the outside to open
the passage of the coffee to the grinder.
English

Publicité

Table des Matières
loading

Table des Matières