Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
EN
DISPENSING COFFEE
The machine will not supply the product until it
reaches the operating temperature. The supply
buttons blink alternately during the heating cycle.
The machine will be ready for use when the lever
reaches the rest position and the supply buttons
come ON steadily.
On first use, deliver at least 0.5 litres of water with-
out inserting a capsule.
Position the cup under the coffee spout.
1
Raise the capsule loader lever and place the
2
capsule in the capsule insertion space applying
light pressure.

MAKING COFFEE

Do not put fingers or other objects in the capsule
insertion space.
The machine features two pre-dosing buttons
3
and one free-dosing button.
If you wish to use different sizes of cups and con-
tainers, the drop collecting tray can be removed
using the pull handle.
Lower the capsule loading lever, then press one
4
of the coffee supply buttons.
STAND-BY
The machine will, after it has not been operated
for 30 minutes, enter the stand-by mode; more
over, the free dosing button will be blinking.
To start the machine again, either press one of the
supply buttons or open the capsule insertion lever.
Short-time dosing
Long-time dosing
Free dosing: when you have the amount of
coffee desired, press the coffee dispenser
button again to stop the flow.

Publicité

Table des Matières
loading

Table des Matières