Cabinet Assembly - Kohler K-3082 Guide D'installation

Loosen screw
and slide hinge
assembly out
Hinge
Assembly

3. Cabinet Assembly

- Loosen screw from the hinge as illustrated. Slide door and hinge off of cabinet and store it in the cabinet box.
Make sure all edges of the door are protected.
- Lay the cabinet on its back. The cabinet should be assembled on a flat surface, not the wall.
- If combining multiple cabinets together, lay the cabinets side by side. Note the locations of the holes in the
cabinets which are used to secure the connectors and side kits.
NOTE: No more than 3 cabinets should be secured together at one time prior to installation.
- Use two connecting blocks for each cabinet addition. Assemble the cabinet to the connecting blocks from the
inside of the cabinet with #10 x 1/2" cut screws.
Kohler Co.
Your cabinet configuration may
be different than the one shown
#10 x 1/2"
Screw
5
Connecting
Block
1010988-2-
A