JVC KD-AVX2 Manuel D'instructions page 42

Indications
Flat/Hard Rock/R&B/Pop/
Jazz/Dance/Country/
Reggae/Classic/User
1/User 2/User 3
Fader/Balance
* Not selectable when DISC is the source and the surround function is activated (see page 26).
1
42
Selectable settings, [reference page]
You can select a preset equalizer settings.
[Initial]; Flat
You can adjust the sound modes and store your own
adjustments in User 1/2/3.
1 Select the frequency band to adjust—
60 Hz, 150 Hz, 400 Hz, 1kHz, 2.5kHz, 6.3kHz, 15kHz.
2 Adjust the level of the selected band (–05 to +05).
3 Repeat steps 1 and 2 to adjust other frequency bands.
4 Press ENT.
5 Select the preset name (User 1, User 2, User 3) you want
to store the setting into.
6 Press ENT.
Select frequency band
Adjust fader—speaker output balance between the front and
rear speakers.
•Upmost—front only
•Downmost—rear only
When using a two-speaker system, set the fader to the center
(00).
Adjust balance—speaker output balance between the left and
right speakers.
• Leftmost—left only
• Rightmost—right only
Press ENT to finish the procedure.
Adjust balance
Adjust balance
Adjust EQ level
Select frequency band
Adjusts fader