Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
M. MATERIAL
The pump of the CENTRI station is made from a
technopolymer material that guarantees maximum
resistance to all the forms of stress to which the
pump may be subjected during transfer operations.
All internal and external metal parts are made from
AISI 303 stainless steel.
O. PROBLEMS AND SOLUTIONS
PROBLEMS
THE MOTOR
IS NOT TURNING
THE PUMP
IS NOT PRIMED
P. TECHNICAL SPECIFICATIONS AND PERFORMANCE
Voltage
Frequency
Current Type
Absorbed power
Absorption
Insulation category
Flow rate,
manual / automatic nozzle
Discharge height
Station weight,
manual / automatic nozzle
Pump weight
Protection
Noise level
Drum connection
Electrical connections
Pump connections
Intake / Delivery tube
10
POSSIBLE CAUSE
Lack of electric power.
Probable emptying
of the intake tube.
CENTRI 230 V
230 V
50 Hz
AC single phase
224 W
0.97 A
II
35 / 30 l/min
10 m
4.5 / 5.5 Kg
1.8 Kg
IP x 4
70 dB
M64x4 - 2"G
Lenght cable 4 m
+ Schuko plug
hose-end fitting ø19
6 m øi19
N. EMERGENCY OPERATION
In the case of power failure or when small quantities
of liquid need to be transferred, it is possible to
operate the pump manually, in the following manner:
• keep the lever of the dispensing nozzle pressed (5);
• activate the trigger repeatedly
(12/15 times approx.) (6);
• proceed to the transfer.
CORRECTIVE ACTION
Check the electrical connections and safety systems.
Contact the Service Department.
Prime according to the described procedure.
CENTRI 12 V
12 V
Continuous Current
110 W
9.2 A
III
35 / 25 l/min
10 m
4.5 / 5.5 Kg
1.8 Kg
IP x 4
70 dB
M64x4 - 2"G
Lenght cable 4 m
+ clamps
hose-end fitting ø19
6 m øi19
CENTRI 24 V
24 V
Continuous Current
135 W
5.6 A
III
35 / 25 l/min
10 m
4.5 / 5.5 Kg
1.8 Kg
IP x 4
70 dB
M64x4 - 2"G
Lenght cable 4 m
+ clamps
hose-end fitting ø19
6 m øi19
Publicité
Table des Matières
