DOMENA Xelys 1 Guide De Démarrage Rapide page 19

Masquer les pouces Voir aussi pour Xelys 1:
Table des Matières

Publicité

AUSWECHSELN DER KALKFILTER-KARTUSCHE
GERÄTE MIT EMC-SYSTEM :
Kontrolllampe zum Wechseln der Kartusche
EMC : Electronic Mineral Control
Das elektronische EMC-System kontrolliert den Zustand der
Kalkfilter-Kartusche, indem es fortlaufend die Anteile an Mineral-
Elementen in dem mit der Kartusche gefilterte Wasser mißt. Das
EMC-System erlaubt so, jedes Verkalkungsrisiko zu vermeiden.
Kontrolllampe für das Auswechseln der
Kalkfilter-Kartusche
Wenn die Kalkfilter-Kartusche verbraucht ist, bewirkt das
EMCSystem ein Blinken der Kontrolllampe, um anzuzeigen, daß
die Kartusche ausgewechselt werden muß. Wird die Kalkfilter-
Kartusche nicht ausgewechselt, unterbricht das EMC-System nach
einiger Zeit von selbst die Dampfabgabe.
Um wieder Dampf zu erhalten, muss die Kalkfilter-Kartusche
ausgetauscht werden (oder, falls bisher mit Leitungswasser
gearbeitet wurde, kann kurzzeitig noch destilliertes Wasser benutzt
werden). Nach dem Austauschen der Kartusche, schalten Sie Ihr
Gerät aus und dann wieder ein, um die normalen
Benutzungsbedingungen wieder zu erlangen
KALKFILTER-KARTUSCHE
Die Artikelnummer der Kalkfilter-Kartuschen für dieses Modell ist
400 410 057. Diese Kalkfilter-Kartuschen sind bei Ihrem
Fachhändler erhältlich.
CHANGING THE ANTI-SCALE CARTRIDGE
ASSEMBLY WITH EMC-SYSTEM :
Cartridge lifetime indicator
EMC : Electronic mineral control
The electronic EMC system controls the efficiencyof the anti-scale
cartridge by constantly monitoring the mineral content of the filtered
water. The EMC system therefore eliminates any risk of scaling.
Pilot light for anti-scale cartridge change
Pilot light indicating that anti-scale cartridge must be changed.
When the anti-scale cartridge becomes exhausted, the EMC system
activates the warming light telling you that the cartridge must be
changed. If the anti-scale cartridge is not changed, then soon after,
steam generation will be stopped automatically by the EMC system.
The warning light will then remain permanently on.
To produce steam again, either the anti-scale cartridge must be
changed or distilled water must be used. After changing the
cartridge, the unit must be turned off and on in order to recreate
normal operating conditions
ANTI-SCALE CARTRIDGE
The reference number to order anti-scale cartridges for this irons is
410 057. The anti-scale cartridges are available in blister-pack
from your retailer.
- 19 -
- 19 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Xelys 2Xelys 3

Table des Matières