Publicité
Les langues disponibles
Les langues disponibles
40 | English
Information and settings
k
(9) to display information (press briefl y)
Use
and adjust settings (hold down for at least
three seconds).
Displaying information
In the Info menu (press
call up the following information:
when it is necessary to descale the
appliance
when it is necessary to clean the
appliance
when it is necessary to change the filter
how much coffee has been dispensed
since the appliance was first put into
operation
how many milk drinks have been
dispensed
how much tea water has been prepared
Descale after
150 cups
Displaying settings
k
Hold down
(9) for at least 3 seconds; the
different setting options are then displayed:
(
Language
English
Bosch
k
(9) briefly) you can
)
}
Turn the rotary knob
the different setting options. The currently
active setting is always shown in the display
with brackets. You can change the setting
that is currently displayed by pressing the
p
arrow button
(4). The brackets show the
English
new option, e.g.
setting with the rotary knob.
The changes you have made
are saved automatically. It is
not necessary to confi rm them
additionally.
The following setting options are available
to you:
Language
–
: Press the arrow button
the knob
to select the display language.
Descaling program
–
the appliance, press
and run the descaling programme (see
"Descaling").
Cleaning program
–
appliance, press
run the cleaning programme
(see "Cleaning").
Calc'n'Clean
–
: If you want to descale and
clean the appliance at the same time,
o
start/stop (10) and run the
press
Calc'n'Clean programme (see
"Calc'n'Clean").
Water hardness
–
p
. Turn the knob
water hardness (1, 2, 3 or 4) (refer also to
"Checking and setting the water
hardness").
Coffee temperature
–
p
button
. Turn the knob
coffee temperature.
Auto off after
–
: Press the arrow button
Turn the knob
after which the appliance should
automatically switch to "energy saving
mode" following the last drink preparation.
(5) to switch between
. Now select the new
p
: If you want to descale
o
start/stop (10)
: If you want to clean the
o
start/stop (10) and
: Press the arrow button
to select the required
: Press the arrow
to set the
to enter the time span
TCC78K750 | 01/2009
. Turn
p
.
Publicité
