Changing The Tool - Bosch PMF 180 E Multi Notice Originale

OBJ_BUCH-345-006.book Page 17 Wednesday, May 12, 2010 12:48 PM
Assembly

Changing the Tool

Before any work on the machine itself, pull
the mains plug.
Selecting the Application Tool/Accessory
The following table shows examples for application tools. Further application tools can be found in
the extensive Bosch accessories program.
Accessory
BIM segment
saw blade
Base plate
for sanding,
series Delta
93 mm
HCS plunge
cut saw blade,
wood
HCS plunge
cut saw
blades, wood
BIM plunge
cut saw
blades, metal
HM-Riff seg-
ment saw
blade
HM-Riff delta
plate
Scraper, rigid
Bosch Power Tools
Wear protective gloves when changing appli-
cation tools/accessories. Contact with the ap-
plication tool/accessoriy can lead to injuries.
Material Application
Wooden materials, Separating and plunge cuts; also for sawing
plastic, non-ferrous close to edges, in corners and hard to reach
metals areas;
Example: shortening already installed bottom
rails or door hinges, plunge cuts for adjusting
floor panels
Depends on sand- Sanding surfaces close to edges, in corners
ing sheet or hard to reach areas;
Depending on the sanding sheet for, e.g.,
sanding wood, paint, varnish, stone
Wooden materials, Separating and deep plunge cuts; also for
soft plastics sawing close to edges, in corners and hard to
reach areas;
Example: narrow plunge cut in solid wood for
installing a ventilation grid
Wooden materials, Smaller separating and plunge cuts;
soft plastics Example: Cut-outs in furniture for cable con-
nections
Metal (e.g. unhard- Smaller separating and plunge cuts;
ened nails, screws, Example: Shortening narrow profiles, cutting
smaller profiles), fastening elements such as staples
non-ferrous metals
Grouting joints, soft Cutting and separating close to edges, in cor-
wall tiles, glass-fi- ners or hard to reach areas;
bre reinforces plas- Example: Removing grouting joints between
tic and other abra- wall tiles for repair work, cutting openings in
sive materials tiles, gypsum boards or plastic
Mortar, concrete re- Rasping and sanding on hard surfaces;
mainders, wood, Example: Removing mortar or tile adhesive
abrasive materials (e.g. when replacing damaged tiles)
Carpets, coverings Scraping on hard surfaces;
Example: Removing carpet and tile adhesive
English | 17
2 609 004 835 | (12.5.10)