Introduction; Product Description - Carrier BATTERY LIFE Manuel

GB FR DE ES IT

1. INTRODUCTION

The Battery life units were developed for the transportation market, avoid-
ing the fuel usage and reducing noise and CO
tion units during goods transportation. This non-invasive technology has
high and positive impacts on the driver's quality of life due to its silent
and emission-free operation. Carrier Transicold enables the reduction of
transportation costs while it contributes to having eco-friendly vehicles on
the road.
ADDM/L systems target the Medium-Range vehicles equipped with reefer
units with electrical-standby motor.
During the operation, the Battery life unit generates a 3-phase / 50Hz
grid on-board of the vehicle, making possible supply the electrical-standby
motor, anytime.
Main benefits of the Battery life unit:
• Enables day and night access to city centers;
• Compatible with all vehicles with refrigeration unit, even as retrofit;
• Perfect match with hybrid, LNG and all-electric trucks;
• Ready for vehicles with start-stop system activated.
This manual was designed for the users of Battery life unit.
It contains all the procedures of the Battery life units' daily operation,
namely:
• Safety information;
• The different modes of operation;
• Troubleshooting.
Carrier Transicold also shared a preventive maintenance program that
must be followed in order to guarantee the maximum reliability of the unit
during its lifetime.
It is highly recommended to use original Carrier Transicold spare parts
ensuring the manufacturer's quality and reliability standards.

2. PRODUCT DESCRIPTION

Battery life unit are composed of three essential components when in-
stalled in drawbars or trailers:
1. Battery life unit Plug-in Electric system attached to the vehicle.
2. Telematics unit with a display;
3. My ADDvolt digital platform for monitoring by the fleet manager.
Every product is accompanied by an identification label containing, among
others, the respective Model, Serial Number and Rating Values.
62-61974-04
NL DK
emissions of refrigera-
2
The removal of the label will result in warranty void of the product.
Table 1. Additional system specifications
Operating Ambient Temperature
Compliance and Safety
Battery Technology
Battery Lifetime
Charging
AC Installation Requirements
Frame and Enclosure
The Battery life units' may be used in load constantly at tempera-
tures below zero to avoid the battery internal temperature to drop
below 0ºC for Charging and -11ºC for discharging.
The Battery are only allowed to operate within these limits for
its internal temperature.
It is of extreme importance to charge the system to 100% if the
system is not going to be operated for more than 60h.
For low ambient temperature performance, please cover the Bat-
tery side air inlets with the special covers provided.
If, during operation, a problem occurs with the unit, before con-
tacting the Carrier Transicold customer support, please have the
following unit data available:
• Serial number;
• Battery life unit model.
-20ºC to 40ºC
CE and ECE R10
Lithium Ion
4000 cycles (80% DOD
to 70% of rated capacity)
On-board charger, 400V AC 50Hz
3x400V AC 50Hz, standard
5 pole 16/32A CEE socket
Stainless Steel
3