REMS Tiger ANC Instructions D'emploi page 10

eng
3.4. Stainless steel pipes, hard cast iron pipes
For sawing stainless steel pipes and hard cast iron pipes use REMS Tiger
ANC SR and one of the REMS universal saw blades 561003 ... 561006.
For square cutting the guide support is essential (see 2.2.). Only when
cutting stainless steel, use REMS Spezial or REMS Sanitol for cooling
and lubricating.
Be sure to buy the right saw blade first time.
The right choice will save you expense and trouble.
REMS 2"/4"
special saw blade
Specially developed for REMS Tiger ANC. Absolutely essential for right angle
sawing and for fast dismantling with power transmitting guide support. This
results in multiple sawing pressure through 5-fold power transmitting lever-
age effect. Normal saw blades with single tang do not withstand the high
feed pressure during sawing with guide support, they break at the mounting
point. For this reason, extra thick REMS special saw blade, resistant to ben-
ding and distortion. Double tang mounting with exceptionally wide clamping
face ensures accurate seating and high stability. Coarse, corrugated tooth
pattern for rapid sawing. Long service life.
1. For REMS Tiger ANC, REMS Tiger ANC VE, REMS Tiger ANC SR,
REMS Tiger ANC pneumatic
and other brands.
2. For all REMS reciprocating saws
and other brands.
3. For all REMS reciprocating saws
and other brands.
4. Maintenance
Before any repair work, pull the mains plug or remove the battery!
4.1. Maintenance
REMS
For free-hand sawing and for sawing with power transmitting guide support.
Only 1 universal saw blade instead of many different saw blades. Resilient
material, highly flexible, also for flush-to-wall sawing. Double tang mounting
with exceptionally wide clamping face for accurate seating and high stabili-
ty. Normal saw blades with single tang do not withstand the high feed pres-
sure during sawing with guide support, they break at the mounting point. Al-
ternating tooth pattern (combo-toothing), specially hardened in the toothing
area. Thus outstanding cutting performance and prolonged service life. Al-
so for hard-to-machine materials, e.g. stainless steel pipes, hard cast iron
pipes, etc., and for sawing nail-embedded wood, pallets.
REMS special saw blade (yellow)
for right angle sawing and for fast dismantling with power transmitting guide support.
REMS special saw blade 2"
for steel pipes up to 2"
REMS special saw blade 2"
for steel pipes up to 2"
REMS special saw blade 4"
for steel pipes up to 4"
For hard-to-machine materials, e.g. stainless steel pipes, hard cast iron pipes, use the finer toothed
REMS universal saw blade instead of the REMS special saw blade in combination with
REMS Tiger ANC SR with electronic speed regulation.
REMS universal saw blade (red)
for free-hand sawing and for sawing with power transmitting guide support.
REMS universal saw blade 100
REMS universal saw blade 150
REMS universal saw blade 200
REMS universal saw blade 300
Also for nail-embedded wood, pallets. For hard-to-machine materials, e.g. stainless steel pipes,
hard cast iron pipes, lower speed required e.g. by using REMS Tiger ANC SR with electronic
speed regulation.
REMS saw blades – for free hand sawing for different purposes.
REMS saw blade
Metals 3 mm and thicker
REMS saw blade
Metals 1–3 mm
REMS saw blade
Metals 1–3 mm (for curved cuts)
REMS saw blade
Metals 4 mm and thicker,
nail-embedded wood, pallets
REMS saw blade
All types of wood
REMS saw blade
Plasterboards, breeze blocks etc.
The REMS reciprocating saws are maintenance free. The gear runs in a
sealed grease housing and therefore does not need any lubrication.
100/150/200/300
universal saw blade
Lenght Tooth
mm pitch mm
140 2,5
140 3,2
200 3,2
100 1,8/2,5
150 1,8/2,5
200 1,8/2,5
300 1,8/2,5
100 1,8
150 1,8
200 1,8
150 1,4
90 1,4
150 2,5
300 4
150 5
eng
Material Colour Art. no.
(pack of 5)
HSS-Bi yellow 561007
HSS-Bi yellow 561001
HSS-Bi yellow 561002
HSS-Bi red 561006
HSS-Bi red 561005
HSS-Bi red 561003
HSS-Bi red 561004
HSS-Bi red 561101
HSS-Bi red 561103
HSS-Bi red 561102
HSS-Bi 561104
red
HSS-Bi 561107
red
HSS-Bi black 561110
WS black 561111
WS white 561115