Slave Mode - Cameo ROOT PAR 4 Manuel D'utilisation

2nd step
3rd step 15 colors from Color Preset
4 colors from User Color
Blackout
-------
4th step
ROOTPAR6
STANDALONE MODE LOOP (Loop 1–4)
Dimmer Sets brightness
Step time Sets step time
Fade time Sets fade time in percent
Delay Delay time for slave groups
1st step 15 colors from Color Preset
4 colors from User Color
UV light
Blackout
2nd step
3rd step 15 colors from Color Preset
4 colors from User Color
UV light
Blackout
-------
4th step

SLAVE MODE

Standard slave mode: Starting from the main display, press MODE to enter the main menu.
Now use UP and DOWN to select the menu item Slave, confirm with ENTER, select Slave Group
0 and again confirm with ENTER. Connect the slave and the master units (same model, same
software version) using a DMX cable, and enable one of the standalone modes on the master unit
(Auto, Static, Color Preset, User Color, Loop). The slave unit will now exactly follow the master unit.
--------Menu------- ----Slave Group----
DMX Address Standalone
DMX Mode Slave
DMX Delay Settings
Standalone
Slave
Settings
System Info
16
"
"
"
"
Mode
Slave
0
Main display
"
Red to CW (Cold White)
User 1 to User 4
Blackout
Skip step
"
0–100
0.1 s to 10.0 s
0% to 100%
0.0 s to 2.0 s
Red to CW (Cold White)
User 1 to User 4
UV
Blackout
"
Red to CW (Cold White)
User 1 to User 4
UV
Blackout
Skip step
"