Filling The Dispenser; Rinse Aid Setting; Using The Dishwasher - GE GSC1807 Manuel D'utilisation

Using the dishwasher.

Check the Water Temperature
The entering water should be at least 120°F
(50 °C) and not more than 150°F (65.5 °C), for
effective cleaning and to prevent dish damage.
Check the water temperature with a candy or
meat thermometer.
Use Jet-Dry
Jet-Dry
cookware and plastic.

Filling the Dispenser

The rinse agent dispenser holds 3.5 oz. (99 mL) of rinse agent. Under normal
conditions, this will last approximately one month. Try to keep it full,
but do not overfill.
Make sure the dishwasher door is fully open.
1
Turn the dispenser cap to the left and lift it out.
2
Add rinse agent until the indicator window looks full.
3
Clean up any spilled rinse agent with a damp cloth.
4
Replace the dispenser cap.
5

Rinse Aid Setting

The amount of rinse agent released into the final wash can be adjusted.
The factory setting is at the midpoint. If there are rings of calcium
(hard water) spots on dishes, try a higher setting.
To adjust the setting
Remove the dispenser cap; then turn the adjuster counterclockwise
to increase the amount of rinse agent.
Portable Models
For instructions on how to use the unicouple, please refer to the Installation Instructions .
Rinse Agent
®
® rinse agent removes spots and prevents new film buildup on your dishes, glasses, flatware,
Turn on the hot water faucet nearest the
dishwasher, place the thermometer in a glass and
let the water run continuously into the glass until
the temperature stops rising.
GEAppliances.ca
Indicator
Adjustable setting
Dispenser cap
7