Barrette BOL-WEB Instructions D'installation page 6

8.
Using 3x #10x1" Screws, install one (F4) per rail
and aligned with the rail (Figs. 11&12).
9.
Remove clamps from gate.
10.
Repeat steps 2-9 to install the second gate
upright.
6
⁄ ⁄ ⁄ ⁄ " from the back of the gate upright
5 5 5
8 8
Fig. 11
Install F4 Install F4 Install F4
Here Here Here Here
Install F4 Install F4
Here Here
A A
Panel Panel
F4 F4
Finished Gate Section Finished Gate Section
Fig. 12
5/8" 5/8"