Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Super Digital Inverter
12
APPLICABLE OUTDOOR UNIT CONTROL FUNCTIONS
You can use the following functions by attaching the "Application control kit" (TCB-PCOS1E2) sold separately.
Demand control function
•
Cooling/heating capacity of the outdoor unit is saved by receiving/converting external demand signals, according to
temporary peak-cut conditions.
•
Capacity savings can be adjusted to three steps: 75%, 50%, and operation stop.
Night operation control (Sound reduction) function
In order to reduce noise levels at night, if incorporating this control with a commercially available timer, the outdoor operating
sound level will be reduced by approx. 5 dB during cooling operation.
Compressor operation output function
Checks the compressor operation time for maintenance etc.
13
ANNUAL MAINTENANCE
•
For an air conditioning system that is operated on a regular basis, cleaning and maintenance of the indoor/outdoor units are
strongly recommended.
As a general rule, if an indoor unit is operated for about 8 hours daily, the indoor/outdoor units will need to be cleaned at
least once every 3 months. This cleaning and maintenance should be carried out by a qualified service person.
Failure to clean the indoor/outdoor units regularly will result in poor performance, icing, water leaking and even compressor
failure.
EN
21
Publicité
Chapitres
Table des Matières
