Declaration Of Conformity; Cleaning The Tool; Environmental Protection - Worx WG583E Mode D'emploi

Souffleur/aspirateur/broyeur sans fil
Masquer les pouces Voir aussi pour WG583E:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
Only one light is
flashing twice per
cycle.
Only one light is
flashing three times
per cycle.
Only one light is
flashing four times
per cycle.
STORAGE
Store the Blower/Vacuum indoors, in a cool dry location,
out of reach of children and animals.

CLEANING THE TOOL

Clean the tool regularly.
Warning! Keep your product dry. Under no
circumstances spray with water.
-
To clean the tool, use only mild soap and a damp
cloth.
-
Do not use any type of detergent, cleaner or
16
solvent which may contain chemicals that
could seriously damage the plastic.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
Cordless Blower/Vac/Mulcher
At least one battery is over
discharged (please refer to
the battery charge condition),
please recharge the two
batteries at once before use
again or storage.
At least one battery is hot, wait
for them cool down before
start again.
The machine is over load.
Remove tool from blowing
area and try again.
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description Battery-operated Blower Vacuum
Type WG583E WG583E.9 (5-designation of
machinery, representative of battery-operated
Blower Vacuum)
Function blowing and picking up debris into a
debris collector
Complies with the following Directives:
2006/42/EC, 2014/30/EU
2011/65/EU&(EU)2015/863
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per Annex V
- Measured Sound Power Level
- Declared Guaranteed Sound Power Level 103 dB(A)
Standards conform to:
EN 60335-1, EN 50636-2-100, EN 62233,
EN ISO 3744, EN 55014-1, EN 55014-2
The person authorized to compile the technical file,
Name
Marcel Filz
Address
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2021/04/12
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
99.7 dB(A)
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wg583e.9

Table des Matières