Worx WG583E Mode D'emploi page 10

Souffleur/aspirateur/broyeur sans fil
Masquer les pouces Voir aussi pour WG583E:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
discharge zone; this may
prevent proper discharge
and can result in kickback of
material through the intake
opening.
i) If the machine becomes
clogged, shut-off the
power source and remove
the battery pack from the
machine before cleaning
debris.
j) Never operate the machine
with defective guards or
shields, or without safety
devices, for example debris
collector in place.
k) Keep the power source
clean of debris and other
10
accumulations to prevent
damage to the power
source or possible fire.
l) Do not transport this
machine while the power
source is running.
m)Always disconnect the
machine from the power
supply (e.g. remove the
battery pack from the
machine)
- whenever you leave the
machine,
- before clearing blockages
or unclogging chute,
- before checking, cleaning
or working on the machine.
n) Avoid using the machine
Cordless Blower/Vac/Mulcher
in bad weather conditions
especially when there is a
risk of lightning.
4) Maintenance and storage
a) keep all nuts, bolts and
screws tight to be sure the
appliance is in safe working
condition.
b) Check the debris collector
frequently for wear or
deterioration.
c) Replace worn or damaged
parts.
d) Use only genuine
replacement parts and
accessories.
e) Store the machine in a dry
place out of the reach of
children.
f) When the machine is
stopped for servicing,
inspection, or storage, or
to change an accessory,
shut off the power source,
disconnect the machine
from the supply and make
sure that all moving parts
are come to a complete
stop. Allow the machine
to cool before making any
inspections, adjustments,
etc. Maintain the machine
with care and keep it clean.
g) Store the machine in a dry
place out of the reach of
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wg583e.9

Table des Matières