Setting The Equalizer (Eq7) - Sony CDX-M800 Mode D'emploi

Masquer les pouces Voir aussi pour CDX-M800:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

*1 When Clock mode is set to on:
– The time is always displayed in the main display
window when normal play mode is selected from
"Selecting the display mode and display image"
(page 20) and "A.IMG-off" is selected (page 17).
– The time is always displayed in the sub display
window.
*2 "Contrast" appears only in the sub display window.
You can adjust the contrast of the sub display
window only.
Sound
• HPF (High pass filter)
– to select the cut-off frequency to "78Hz,"
"125Hz," or "off."
• LPF (Low pass filter)
– to select the cut-off frequency to "78Hz,"
"125Hz," or "off."
• Loudness
– to enjoy bass and treble even at low volumes.
The bass and treble will be reinforced.
• AUX Level (page 21) — to adjust the volume
level of connected auxiliary equipment.
Play Mode
• Local on/off (Local seek mode) (page 14)
– Select "on" to only tune into stations with
stronger signals.
• Mono on/off (Monaural mode) (page 14)
– Select "on" to hear FM stereo broadcast in
monaural. Select "off" to return to normal
mode.
• IF Auto/Wide (page 14)
1
Press (MENU).
To set Demo, press (OFF), then press
(MENU).
To set A.Scroll, press (MENU) during CD/
MD playback.
2
Press M or m repeatedly until the
desired item appears.
3
Press < or , to select the desired
setting (Example: "on" or "off").
4
Press (ENTER).
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories by pressing M
or m for 2 seconds.
18

Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music
types (Xplod, VOCAL, CLUB, JAZZ,
NEW AGE, ROCK, CUSTOM), and OFF
(equalizer off).
You can store and adjust the equalizer settings
for frequency and level.
You can store the EQ7 setting for each source.
Selecting the equalizer curve
1
Press (SOURCE) to select a desired
source.
2
Press (EQ7) repeatedly to select a
desired equalizer curve.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select "OFF."
After 3 seconds, the display returns to the
normal play mode.

Publicité

Table des Matières
loading

Table des Matières