Endress+Hauser Advanced Paperless Recorder eco-graph a Mise En Service page 55

• Submenu Display: Settings for measured value plot display.
Indicates how many grid divisions (amplitude grid the screen is to be divided
into when operating in "Plot" mode.
Grid divisions
Examples: Display of 0...100%: Selecct 10 grid divisions, display of 0...14 pH:
Select 14 grid divisions.
sets the line definition in which the analogue signal is to be plotted
Pen size
(normal = 1 dot with thin pen, wide = 2 dots with wide pen).
Instantaneous values: The pens follow the actual instantaneous value
Pens displaying
independent of the set storage cycle.
Stored values: The pens display the last stored measured value.
• Submenu Diskette change: Settings that describe when and how "diskette full"
is to be indicated.
Warning on screen before diskette is 100% full.
Hint: The internal (ring) memory continues to be written to during diskette
Warning at xx %
change or full diskette. The new data is copied to the new diskette once it has
been placed into the drive (important for secure archiving).
When the warning message "Change Diskette" is displayed a relay can also
be activated (only with "Digital I/O option).
Switched output
The respective terminal numbers are displayed in brackets.
See "Installation/connection/setting up"
"Yes": The "Change diskette" message is displayed until it has been
acknowledged by operating a push button.
Acknowledge hint "No": The message is not displayed.
Hint: The percentage of space used up in data storage is always displayed in
normal operation (right in the screen header).
4. Setting up unit - SET UP
53