Connecting To An Audio System (Dolby Digital, Dts Amplifier) - Better Quality - Samsung BD-P4600 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

cOnnecting tO an audiO sYsteM
(dOlBY digital, dts aMPliFieR) - BetteR QualitY
1.
Using an optical cable (not included), connect the digital audiO Out (OPtical) terminal on the bottom of
the Blu-ray Disc Player to the digital audiO in (OPtical) terminal of your Amplifier.
2.
Using the video signal cable(s), connect the hdMi or VideO Out terminals on the bottom of the Blu-ray Disc
Player to the hdMi or VideO in terminal of your TV. (See pages 24~27)
3.
Turn on the Blu-ray Disc Player, TV and Amplifier.
4.
Press the input select button of the Amplifier to select the external input in order to hear sound from the
Blu-ray Disc Player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
M
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
Please set the audio in the menu screen according to the Amplifier. (See pages 39~41)
The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of your
Amplifier.
When using this connection, discs with LPCM audio soundtracks will only be heard over the front two
channels.
Optical cable
(not included)
English _2

Publicité

Table des Matières
loading

Table des Matières