Case 2 : Connecting To An Audio System (Dolby Digital, Dts Amplifier) - Better Quality; Case 3 : Connecting To An Audio System (2 Channel Amplifier) - Good Quality - Samsung BD-C5500 Mode D'emploi

Case 2 : Connecting to an Audio
System (Dolby Digital, DTS
Amplifier) - Better Quality
Using an optical cable, connect the DIGITAL
1.
AUDIO OUT (OPTICAL) terminal on the
rear of the player to the DIGITAL AUDIO IN
(OPTICAL) terminal of your Amplifier.
Using the video signal cable(s), connect
2.
the HDMI, COMPONENT or VIDEO OUT
terminals on the rear of the player to the
HDMI, COMPONENT or VIDEO IN terminal
of your TV. (See pages 20~23)
Turn on the player, TV and Amplifier.
3.
Press the input select button of the Amplifier
4.
to select the external input in order to
hear sound from the player. Refer to your
Amplifier's user manual to set the Amplifier's
audio input.
Case 2 : Optical cable
Red White
NOTE
▪
When following the case 2 connection, discs with PCM audio soundtracks will only be heard over the front two
channels.
(not included)
Case 3 : Connecting to an Audio
System (2 Channel Amplifier)
- Good Quality
Using the audio cables, connect the AUDIO
1.
OUT (red and white) terminals on the rear of
the player to the AUDIO IN (red and white)
terminals of your Amplifier.
Using the video signal cable(s), connect
2.
the HDMI, COMPONENT or VIDEO OUT
terminals on the rear of the player to the
HDMI, COMPONENT or VIDEO IN terminal
of your TV. (See pages 20~23)
Turn on the player, TV and Amplifier.
3.
Press the input select button of the Amplifier
4.
to select the external input in order to
hear sound from the player. Refer to your
Amplifier's user manual to set the Amplifier's
audio input.
Case 3 : Audio cable

English