Case 2 : Connecting To An Audio System (Av Receiver With Dolby Digital Or Dts Decoder) - Better Quality; Case 3 : Connecting To An Audio System - Samsung BD-D5300 Manuel D'utilisation

Case 2 : Connecting to an Audio
System (AV receiver with Dolby
Digital or DTS decoder) - Better
Quality
1. Using an optical cable, connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the
rear of the player to the DIGITAL AUDIO IN
(OPTICAL) terminal of your AV receiver.
2. Using the video signal cable(s), connect the
HDMI, or VIDEO OUT terminals on the rear of
the player to the HDMI, or VIDEO IN terminal
of your TV. (See pages 18~19)
3. Turn on the player, TV, and AV receiver.
4. Press the input select button of the AV receiver
to select the external input and hear sound from
the player. Refer to your AV receiver's user
manual to set the AV receiver's audio input.
5. Press the input selector on your TV remote
control to select the video source (HDMI, or
Video.)
Red White
NOTE
✎
If you use the Digital Audio connection described in Case 2, you will hear only front two speakers with Digital Output
▪
setting as PCM.
Case 3 : Connecting to an Audio
System (Stereo Amplifier)
- Good Quality
1. Using the audio cables, connect the AUDIO
2. Using the video signal cable(s), connect the
3. Turn on the player, TV and Stereo Amplifier.
4. Press the input select button of the Stereo
5. Press the input selector on your TV remote
Case 2 : Optical cable
(not included)
OUT (red and white) terminals on the rear of
the player to the AUDIO IN (red and white)
terminals of your Stereo Amplifier.
HDMI, or VIDEO OUT terminals on the rear of
the player to the HDMI, or VIDEO IN terminal
of your TV. (See pages 18~19)
Amplifier to select the external input in order
to hear sound from the player. Refer to your
Stereo Amplifier's user manual to set the Stereo
Amplifier's audio input.
control to select the video source (HDMI, or
Video.)
Case 3 : Audio cable
21
English