Wireless Network - Samsung BD-C5500 Mode D'emploi

Wireless Network

You can connect to network with a Wireless IP sharer.
1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless
LAN adapter to the Wireless LAN Adapter on the rear panel of the player.
2. Set the network options. (See pages 36~39)
Broadband
service
NOTE
▪
Use only the optional Samsung wireless LAN adapter with this player. (Model name: WIS09ABGN ).
Do not use this adapter with any other third-party products.
Please contact the retailer of this player for purchasing the wireless LAN adapter.
▪
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the
wireless network.)
▪
Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance,
obstacles, interference by other radio devices, etc).
▪
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
▪
When applying the security key for the AP (wireless IP sharer), only the following is supported.
1) Authentication Mode : WEP, WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES
▪
For the AllShare function, a PC must be connected in the network as shown in the figure.
Wireless IP sharer
Networking with PC for
AllShare function
(See pages 55~56)
Wireless LAN Adapter
(not included)

English