Next Level Racing FGT ELITE LITE Manuel D'instructions page 12

support@nextlevelracing.com
)
A Align End Cap to
corner of extrusion.
YOUR COCKPIT IS COMPLETE
It's time to install your electronics. If you have any questions about your setup you
can contact us directly at: support@nextlevelracing.com or you can join the
community on Discord or Facebook
bit.ly/nlr-discord
36
Install the End Caps. Your F-GT Elite Lite is Complete.
22
) )
B Depress the centre C Finished End Cap.
of the End Cap and align the tab to
the first hole. Then align second tab
with the second hole.
bit.ly/NLRowner
WARNING
Please do not use power tools for assembly as over tightening can damage your frame.
If you require further support, consult the installation video or contact us at support@nextlevelracing.com
Please ensure T-Nuts are correctly placed within the extrusion.
Lay out and build the cockpit on a level surface.
The F-GTElite Lite is a 2 person build.
Do not force parts together.
Avoid cross threading bolts.
ASSISTANCE
bit.ly/nlrbuild
If you require further support with your product please
contact our friendly team at: support@nextlevelracing.com
23
Video Instruction: bit.ly/nlrbuild
ASSEMBLY
VIDEO