Publicité
Les langues disponibles
Les langues disponibles
[YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the type
of external device, and then switches to
the matching color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2
video signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4
video signals.
[RGB]: Select this when connecting to a
device with an HDCP compliant DVI jack.
[Video Direct]
You can disable the On-Screen Display
(OSD) of the system when [HDMI1],
[HDMI2] or [HDMI3] input is selected.
This function is useful when playing a
game, you can fully enjoy the game's
screen.
[On]: Disables the OSD. Information will
not display on the TV screen and the
OPTIONS and DISPLAY buttons will not
work.
[Off]: Displays information on the TV
screen only when you change the
settings, such as when selecting the
sound field.
[SBM] (Super Bit Mapping)
[On]: Smooths the gradation of video
signals output from the HDMI OUT (ARC)
jack.
[Off]: Select this if video signals are
distorted or color is unnatural.
[Audio Settings]
[DSEE]
This function is only available when
[Music] is selected as the sound field.
[On]: Enhances sound quality by
restoring high-range sound (page 41).
[Off]: Off
[Audio DRC]
You can compress the dynamic range of
the sound track.
50
GB
[Auto]: Automatically compresses
sound encoded in Dolby TrueHD.
[On]: The system reproduces the sound
track with the kind of dynamic range
that the recording engineer intended.
[Off]: No compression of dynamic
range.
[Attenuation settings - Analog]
Distortion may occur when you listen to
a device connected to the ANALOG IN
jacks. You can prevent distortion by
attenuating the input level on the
system.
[On]: Attenuates the input level. The
output level will decrease at this setting.
[Off]: Normal input level.
[Audio Output]
You can select the output method used
for audio signal output.
[Speaker]: Outputs multi-channel sound
from the system's speakers only.
[Speaker + HDMI]: Outputs multi-
channel sound from the system's
speakers and 2-channel linear PCM
signals from the HDMI OUT (ARC) jack.
[HDMI]: Outputs sound from the HDMI
OUT (ARC) jack only. Sound format
depends on the connected device.
Note
When [Control for HDMI] is set to [On]
(page 52), [Audio Output] is set to
[Speaker + HDMI] automatically and this
setting cannot be changed.
[Bluetooth Settings]
[Bluetooth Mode]
You can enjoy content from a
BLUETOOTH device by using this system
or listen to sound from this system by
using BLUETOOTH-compatible
headphones or speaker.
[Receiver]: This system is in receiver
mode, which enables it to receive and
Publicité
