Publicité
Les langues disponibles
Les langues disponibles
• Depending on the settings of the TV, the
System Audio Control function may not
be available. For details, refer to the
operating instructions of your TV.
Audio Return Channel
If the system is connected to a TV's
HDMI IN jack compatible with Audio
Return Channel, you can listen to TV
sound from the speakers of the system
without connecting an optical digital
cable.
On the system, turn [System Settings] -
[HDMI Settings] - [Audio Return
Channel] to [Auto] (page 52). The
default setting is [Auto].
Note
If the TV is not compatible with Audio
Return Channel, the optical digital cable
(not supplied) needs to be connected (refer
to the supplied Startup Guide).
One-Touch Play Function
When you play content on a device (Blu-
ray Disc recorder, "PlayStation
connected to the system, the system
and TV are turned on automatically, the
input of the system is switched to the
input for the device played, and sound is
output from the speakers of the system.
Notes
• If [System Settings] - [HDMI Settings] -
[Standby Through] on the system is set to
[On] or [Auto] and the TV sound was
output from the speakers of the TV the
previous time you watched the TV, the
system does not turn on and the sound
and picture are output from the TV even if
device content is played (page 52).
• Depending on the TV, the beginning part
of content being played may not play
correctly.
Remote Easy Control
You can operate the system by selecting
the system from the TV's Sync Menu.
This function can be used if the TV
supports the Sync Menu. For details,
refer to the operating instructions of
your TV.
Notes
• In the TV's link menu, the system is
recognized by the TV as "Player."
• Some operations may not be available
with some TVs.
HDMI Standby Through
Power Saving Setting
HDMI Standby Through power saving
setting (page 52) is a function that
allows you to enjoy the sound and
picture of a connected device without
turning on the system.
Set [System Settings] - [HDMI Settings] -
[Standby Through] to [Auto] (page 52).
The default setting is [Auto].
4," etc.)
®
Note
If the picture of a device connected to the
system is not displayed on the TV, set
[Standby Through] to [On]. If you connect a
TV other than those manufactured by
Sony, we recommend you to select this
setting.
45
GB
Publicité
