Télécharger Imprimer la page

Siemens Profiset 3010 Manuel D'utilisateur page 8

Publicité

All manuals and user guides at all-guides.com
: Repeat the new password (4 digits)
Press the PROG key
Listen for the confirmation tone (long
beep)
Replace the handset
If the entered password does not match the
programmed password, or if the password
is repeated incorrectly, a warning tone will
be emitted (3 short beeps).
Key lock
This telephone features a key lock for
mobile phone calls, long-distance calls and
international calls. When the lock for mobile
phones is enabled, users cannot make calls
to numbers that begin with 8 or 9. When the
lock for long-distance calls is enabled,
users cannot make calls to numbers that
begin with 0. When the lock for international
calls is enabled, users cannot make calls to
numbers that begin with 00.
Note:
The lock for mobile phone calls may not
work properly in some countries due to the
numbering plan for mobile phones used in
these countries.
Locking or unlocking the telephone:
Lift the handset
Press the PROG key
Press the
: Enter the password (4 digits)
Press the
Select the desired lock setting:
unlock
lock for mobile phones
lock for long-distance calls
key
key
lock for mobile phone calls and
long-distance calls
lock for international calls
lock for mobile phone calls and
international calls
lock for all types of calls
Press the PROG key
Listen for the confirmation tone (long
beep)
Replace the handset
Note:
• If the long-distance call lock is enabled,
the telephone will also be locked for
international calls.
• If the telephone is connected to a PBX
system
and
access codes coincide with the DDD,
DDI and mobile phone prefixes, the lock
feature will not work properly.
Temporary unlocking of the telephone:
If you know the password, you can unlock
the telephone to make calls. Once a call is
completed, the telephone will revert to the
most recent lock state. To unlock the
telephone temporarily, proceed as follows:
Lift the handset
Press the PROG key
Press the
: Enter the password (4 digits)
Press the PROG key
: Dial the desired telephone number
7
the
programmed
key
trunk

Publicité

loading

Ce manuel est également adapté pour:

Hipath 1100