Télécharger Imprimer la page

Siemens Profiset 3010 Manuel D'utilisateur page 4

Publicité

Setting the dialing mode (tone/pulse)
All manuals and user guides at all-guides.com
Your telephone must be programmed for
TONE dialing or PULSE dialing, depending
on the telephone line it is connected to. The
default factory setting is TONE dialing with
a flash time of 270 ms (DTMF).
Checking the dialing mode:
Press any numeric key. If you can still hear
a dialing tone, change to the other dialing
mode.
Changing the dialing mode:
To set the dialing mode to PULSE or
TONE, proceed as follows:
Lift the handset
Press the PROG key
Press the
Press digit 1 to change to TONE or
:
digit 2 to change to PULSE
Press the PROG key
Replace the handset
Temporary change of dialing mode:
While the telephone is set to PULSE dialing
it may be necessary to temporarily change
the dialing mode to TONE dialing.
• Example: You want to check your
banking balance using a telebanking
service. Make the call in the usual way,
and once the connection has been
established, press
will now change to TONE dialing. When
you have finished the call, replace the
handset
and
automatically revert to PULSE dialing.
key
. The dialing mode
the
telephone
Setting the ringer volume and melody
This telephone offers three melodies and
three ringer volumes.
Setting the ringer volume:
Lift the handset
Press the PROG key
Enter one of the codes below,
depending on the desired option:
• 51 low volume
:
• 52 medium volume
• 53 high volume
Press the PROG key
Listen for the confirmation tone (long
beep)
Replace the handset
Note:
The volume can also be programmed while
the telephone is ringing and without having
to lift the handset. In this case, the
toggles between the 3 available volume
levels.
Setting the melody:
Lift the handset
Press the PROG key
Enter one of the codes below,
depending on the desired option:
• 61 melody 1
:
• 62 melody 2
• 63 melody 3
Press the PROG key
Listen for the confirmation tone (long
beep)
will
Replace the handset
Note:
The melody can also be programmed while
the telephone is ringing and without having
to lift the handset. In this situation, the
key toggles between the 3 available
melodies.
3
key

Publicité

loading

Ce manuel est également adapté pour:

Hipath 1100