Special Features - GE JCGBS66SEKSS Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Special Features

There are several different special features on your range. To change the settings of these special features:
■ P ress the Bake and Broil pads at the same time and hold for three seconds.
■ " SF" will appear in the display.
■ F or instructions on how to select different features, refer to the section below that corresponds to the special
feature of interest.
■ W hen the change has been made, press the Start key to save the change and exit the special features menu.
Adjust the Oven Temperature
This feature allows the oven baking temperature to
be adjusted up to 35ºF (1.6°C) hotter or down to 35ºF
(1.6°C) cooler. Use this feature if you believe your oven
temperature is too hot or too cold and wish to change it.
This adjustment affects every cooking mode except broil.
After entering the special features menu, press the Bake
pad to enter the temperature adjustment mode. A number
between 35 and - 35 will display. Use the + or - pads to
set the desired temperature adjustment. Press the Start
pad to save the temperature adjustment.
12-Hour Auto Shut-Off and Sabbath
12-hour auto shut-off turns off the oven after 12 hours
of continuous operation. The 12-hour auto shut-off may
be "on" or "oFF." For details on the "sAb" option, see the
Sabbath Mode Section. Enter into the special features
menu as outlined above and repeatedly press the Set
Clock pad until the desired setting is displayed. If your
model does not have a Set Clock pad, then repeatedly
press the Cook Time pad until the desired setting is
displayed. Press the Start pad to save the setting.
16
Clock Display (on some models)
This feature specifies if the time of day is displayed.
The clock display may be "on" or "oFF." If your model
has a Set Clock pad, see the Oven Controls section for
instructions on adjusting the display. If your model does
not have a Set Clock pad, enter into the special features
menu as outlined above. Press the Timer pad to see the
current setting. Press the Timer pad again to change the
setting. Press the Start pad to save the display setting.
Increment/Decrement Speed
A setting (i.e. temperature) may be rapidly adjusted
by pressing and holding the + or - pad. To adjust the
increment/decrement speed, enter into the special
features menu as outlined above. Press the + pad to
increase the speed or press the - pad to decrease the
speed. Settings vary from 1 (slowest) to 5 (fastest).
Press the Start pad to save the speed setting.
29-6099

Publicité

Table des Matières
loading

Table des Matières