Epson ELPMB28 Guide D'installation page 9

Connecting the Control Pad (BrightLink Pro 1410Wi Only)
The control pad is included with the BrightLink Pro 1410Wi projector. It provides a convenient alternative to
the remote control for turning on the projector, changing the source, and selecting whiteboard mode. You can
also use the control pad to capture, print, and save your projected images.
You must install the control pad on the same surface as the projector, within the range shown in the shaded
area below. You can use the included batteries to power the control pad, or the optional remote control cable
set (ELPKC28).
13.8 in.
35.4 in. 27.6 in.
78.7 in. 68.9 in.
(0.35 m)
(0.9 m) (0.7 m)
(2.0 m) (1.75 m)
Remove the top cover and install the batteries. (If you have the optional remote control cable set, you do not
need batteries.)
9.8 in.
(0.25 m)
60-inch
image
100-inch
image
39.3 in. (1.0 m)
59.0 in. (1.5 m)
78.7 in. (2.0 m)
9
Remote control
light emitting areas