Attaching A Security Cable - Epson ELPMB28 Guide D'installation

8 Appendix
Using the Interactive Function (BrightLink and BrightLink Pro models)
After you install a BrightLink or BrightLink Pro model, you need to perform calibration to align the positions of
the cursor and interactive pens.
For details on BrightLink 475Wi/480i/485Wi, see the User's Guide on the BrightLink 475Wi/480i/485Wi CD. For
details on BrightLink Pro 1410Wi, see the online User's Guide. You can install a link to the guide by inserting the
BrightLink Pro 1410Wi CD.
Or, go to one of the following:
U.S.: epson.com/brightlinkdownloads
Canada: epson.ca/brightlinkdownloads

Attaching a Security Cable

If the projector is to be installed in a room where it will be left unattended, you can use a commercially
available theft-prevention wire lock to secure the projector to a post or other object to prevent someone from
taking it.
Pass the wire for the theft-prevention wire lock through the security cable installation point.
For details on how to lock the wire lock, refer to the User's Guide supplied with the wire lock.
After installation of the projector is complete, make sure you leave the remote control,
batteries, and CDs in the room with the projector. For BrightLink and BrightLink Pro, also leave
the pens, batteries, pen tray, battery charger, and Welcome Kit folder or Quick Reference card in
the room with the projector.
44