Epson ELPMB28 Guide D'installation page 6

2 Specifications
Item
Wall mount weight (including the
3-axis adjustment unit, slide plate,
wall plate, wall plate cover, and
end cap)
Maximum load capacity
Forward/backward slide
adjustment range
Vertical slide adjustment range
Horizontal roll adjustment range
Horizontal rotation adjustment
range
Vertical tilt adjustment range
Horizontal slide adjustment range ± 1.8 in. (45 mm)
Wall plate
The wall plate is in three piece when shipped, and the middle piece is attached to the wall mount arm. Use the
included M4 x 12 mm bolts (x6) to attach the separate pieces together before mounting the projector. See
page 26 for instructions.
4.7 in.
(120 mm)
1.2 in.
(30 mm)
Vertical slide adjustment range
Specification
Approx. 16.3 lb Wall mount: 6.2 lb (2.8 kg)
(7.4 kg) 3-axis adjustment unit: 2.4 lb (1.1 kg)
Slide plate: 1.5 lb (0.7 kg)
Wall plate: 5.5 lb (2.5 kg)
Wall plate cover and end cap: 0.7 lb (0.3 kg)
15.4 lb (7 kg) —
0 to 12.2 in. Arm slide adjustment range: 0 to 9.8 in. (248 mm)
(310 mm) Adjustment from 3-axis adjustment unit installation
position: 2.4 in. (62 mm)
± 1.5 in. (38 mm) —
± 3° Fine adjustments possible with adjustment knob
± 3° Fine adjustments possible with adjustment knob
± 3° Fine adjustments possible with adjustment knob
—
4.2 in.
2.9 in.
(106.5 mm)
(75 mm)
18 in. (456 mm)
1.5 in. (38 mm)
1.5 in. (38 mm)
6
Additional information
1.6 in.
(40 mm)
4.4 in.
(112 mm)
8.0 in. (203 mm)
Reference
Page
—
—
Refer to the
illustration
below
Refer to the
illustration
below
38
39
39
Refer to the
illustration
below
1.3 in.
(33 mm)