Technoline WS6447 Mode D'emploi page 14

3. Press the AL SET/ ON.OFF button again,
or  to set the hours of your desired alarm time.
Press the AL SET/ ON.OFF button again, the alarm minute digits flash. Press  or  button to
4.
set the minutes of your desired alarm time.
5. Press the AL SET/ ON.OFF button again to complete set-up. If no key is pressed in
approximate 10 seconds at any time during set-up, the clock will exit the alarm set-up mode.
TO TURN ON OR OFF YOUR DAILY ALARM
1. At normal time display mode, press the AL SET/ ON.OFF button to turn on Alarm 1 only,
appears on the LCD.
2. Press the AL SET/ ON.OFF button again to turn on Alarm 2 only,
3. Press the AL SET/ ON.OFF button again to turn on both Alarm 1 & 2, both
on the LCD.
4. Press the AL SET/ ON.OFF button again to turn off both Alarm 1 & 2, both
disappear on the LCD.
TO USE SNOOZE ALARM
When time reaches your set alarm time, your weather station will give a beep sound to wake you up.
The corresponding
1. Press
flashing. The alarm will beep again according to your set snooze duration.
2. When the alarm is sounding, press AL SET/ ON.OFF once and the alarm will stop for the day,
or become static, alarm will come on again at the same time next day.
Alarm Duration: 2 minutes
TO USE THE HI-LO-OFF DIMMER
At normal time display mode, press
display. This can only be done when the AC/DC adaptor is being used.
TO DISPLAY TEMPERATURE IN DEGREE °C OR °F
Press the / (°C/°F) button to display temperature in °C or °F.
TO USE PROGRAMMABLE AUTO DIM BACKLIGHT
1. At normal time display mode, press and hold
and "OFF" flashes. Press the  or  button to select "ON" to activate the auto dim backlight
function.
2. Press
time.
3. Press
duration by 1 Hr steps from 1Hr to 12 Hr.
4. Press
the auto dim setting and return to normal time display
or will flash.
once to stop the alarm temporarily and the corresponding
button again, "0:00" flash, press  or  button to set auto dim starting
button once again, "8 Hr" flash, press  or  button to set Auto Dim
button once again (or if no key is pressed in around 10 seconds) to store
displayed and the alarm hour digit flash. Press 
to adjust the brightness (Hi/ Lo/ Off) of the LCD
button until the display shows
remains on the LCD display.
EN 5
appears on the LCD.
and appear
and
or keeps