Okamura Sabrina Mode D'emploi page 13

Operation guide – Bedienungsanleitung – Mode
d'emploi – Guía de operación – Guida al funzionamento
– Bedieningshandleiding
Adjusting Lumbar support (option)
GB
Move the Lumbar support on the back side of the seat back, up
and down directly. The Lumbar support can be moved up and
down within a range of 60 mm (2 3/8").
D Einstellen der Lendenwirbelstütze (optional)
Bewegen Sie die Lendenwirbelstütze an der Rückseite der
Sitzlehne direkt nach oben und unten. Die Lendenwirbelstütze
kann innerhalb eines Bereichs von 60 mm (2 3/8") nach oben und
unten bewegt werden.
Réglage du support lombaire (en option)
F
Déplacez le support lombaire sur la face arrière du dossier du
siège vers le haut et vers le bas de manière directe. Le support
lombaire peut être déplacé de haut en bas sur une plage de 60
mm (2 3/8 po).
Ajuste del apoyo lumbar (opcional)
E
El apoyo lumbar situado en la parte trasera del respaldo se puede
subir y bajar directamente en un rango de 60 mm (2 3/8").
Regolazione del sostegno lombare (opzionale)
I
Spostare il sostegno lombare sul retro dello schienale
direttamente in alto e in basso. È possibile spostare il sostegno
lombare in altro e in basso entro un intervallo di 60 mm (2 3/8").
NL Verstellen van de lendesteun (optioneel)
Verstel de lendesteun op de achterzijde van de zitting rechtstreeks
naar achter, op en neer. De lendesteun kan maximaal 60 mm (2 3/8'')
omhoog en omlaag worden versteld.
23
GB Operation guide for options
Headrest (option) attachment and replacement
(1) Insert the grooves of the Headrest into the backside of the
seat back.
(2) Secure it with a fastening bolt.
 Make sure that the Headrest is secured completely before
using.
Hanger (option) attachment and replacement
methods
(1) Insert the tabs of the Hanger into the backside of the seat
back.
(2) Secure it with a fastening bolt.
 Make sure that the hanger is secured completely before
using.
60mm
(2 3/8")
Attaching and Replacing a Headrest (option) and
Hanger (option)
The Headrest and Hanger can be attached at the same time
as shown in the illustration. Attach the Headrest first, and then
attach the Hanger.
mm (inch)
Headrest
Groove
Fastening
bolt
Back
Hanger
Tab
Fastening
bolt
Back
Headrest
Hanger
24