Intended Use - Olympia A2250 Mode D'emploi

Intended Use

The laminator is suitable for hot or cold laminating foils. It can be used for lam-
inating paper or paper-like material such as photos, cards, ID cards or other
documents up to a total thickness of 0.5 mm.
Lamination of unsuitable materials, unsuitable material thicknesses or sizes
annuls all rights to claims under the terms of guarantee.
Read this manual thoroughly and observe the instructions and infor-
mation in it when operating the laminator. Keep the operating manual
in a safe place for future reference.
Pay attention to this symbol. This symbol indicates passages of text
which provide useful information on handling the laminator.
Please observe the following information to ensure reliable operation of the
laminator.
Always disconnect the power plug when the laminator is not in use. Plug the
laminator cable power cable into an easily accessible power socket.
Do not laminate metallic, wet or uneven materials.
Always feed laminating pouches into the laminator infeed with the closed
If necessary, only cut laminating pouches after laminating.
Do not pull the laminating pouch out of the output side during laminating.
20 L
AMINIERGERÄT
A2250 / A3250