Turning The Bluetooth On Or Off; Turning The Bluetooth On; Turning The Bluetooth Off; Viewing Bluetooth Connectivity Status - Motorola WAVE TLK 150 Mode D'emploi

Masquer les pouces Voir aussi pour WAVE TLK 150:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 43
Chapter 10
Bluetooth
This feature allows your radio to connect to Bluetooth (BT)-enabled Headsets and Remote Speaker
Microphones through BT connection.
BT operates within a range of 10 m (32 ft) line of sight. The BT function of your radio has a maximum
power of 2.5 mW (4 dBm) at the 10 m range. This is an unobstructed path between your radio and your
BT-enabled device.
If the voice and tone quality gets distorted or unclear, position your radio and the BT-enabled device
close to each other to re-establish clear audio reception.
10.1

Turning the Bluetooth On or Off

Turning the Bluetooth On

Procedure:
From the menu, select Bluetooth→ .
If the BT is enabled, your radio shows the following indications:
The display shows BT icon on the home screen.
The Voice Announcement sounds.

Turning the Bluetooth Off

Procedure:
From the menu, select Bluetooth→x.
If the BT is disabled, your radio shows the following indications:
The BT icon disappear on the home screen.
The Voice Announcement sounds.
10.2

Viewing Bluetooth Connectivity Status

Procedure:
Press and hold the Contacts/Info button and select Bluetooth.
If your radio is searching for the last connected Bluetooth (BT) device, your radio shows
Searching... and sounds the voice announcement.
If your radio is connected to the BT device, your radio shows Connected and sounds the voice
announcement.
If your BT device is disconnected from your radio, your radio sounds a tone and attempts to reconnect
to the same BT device within a reconnect Time Out.
MN006371A01-AF
Bluetooth
25

Publicité

Table des Matières
loading

Table des Matières