Washing Programs - THOMSON THPRIMO245DFULL Manuel D'utilisation

Adjusting the rinse aid dispenser
To achieve a better drying performance with limited rinse aid, the dishwasher is designed to
adjust the consumption by user. Follow the below steps:
1. Power on the dishwasher.
2. Within 60 seconds after powering on the dishwasher, press and hold
seconds and then
press to enter the setting mode.
The display will show d3.
3. Repeatedly press
4. The setting will be confirmed if there is no operation
in about 5 seconds.
Display
d1
d2
d3
d4
d5
Filling the detergent dispenser
1. Slide the control to the
right to open the
detergent cap.

WASHING PROGRAMS

Type of
Program
Dishes
Auto-sensing
wash for
lightly,
normally or
heavily soiled
Auto
crockery with
or without
dried-on food
For heavily
soiled crockery
and normally
soiled pots,
pans and
Instensive
dishes with
dried-on food
to select the proper setting.
Amount of
rinse aid (mL)
1.2
2.4
3.6
4.8
6.0
2. Add the detergent into the
compartment.
Cycle
Description
Pre- wash( 45 C)
AutoWash
( 55-65 C)
Rinse
Rinse
Rinse(65 C)
Drying
Pre-
wash(50 C)
Wash(65 C)
Rinse
Rinse
Rinse( 60 C)
Drying
Running
Detergent
time
Pre/Main
(min)
5/ 20g
(1 or 2 85-150
pieces)
5/ 20g
(1 or 2 205
pieces)
GB-19
for about 5
3. Close the cap by sliding
it to the front and
pressing it down.
Energy Water
(kWh) (L)
9. 2-
0.984-1.501
13.9
1.602 1 4.1
Rinse aid
needed?
Yes
Yes