Before Installing Your Dishwasher; Installation Instructions; Cold Water Connection - THOMSON THPRIMO245DFULL Manuel D'utilisation

Indicator lights:
Upper zone wash
8
Lower zone wash

BEFORE INSTALLING YOUR DISHWASHER

Before connecting your dishwasher to the power supply, check that the voltage stated on the rating
label of your appliance corresponds to the voltage in your home. The appliance must be grounded. The
manufacturer is not responsible for damages that may occur as a result of usage without grounding.
WARNING: Disconnect electrical power before installing your dishwasher.

INSTALLATION INSTRUCTIONS

Your dishwasher can be installed in various locations in your kitchen as long as there is
space and accessibility to connect your dishwasher to the water/drainage and electrical
supply.
Do not connect an extension lead to the appliance to avoid potential safety hazards.
Applying the Condensation Strip
The condensation strip must be fitted to the underside of the worktop to protect it
against the ingress of moisture.
1. Ensure that the underneath of the worktop is clean.
2. Separate the backing paper away from the strip.
3. Stick the condensation strip to the underneath of the worktop.

Cold Water Connection

The installation of the hose should be done by professionals.
Connect the supplied water supply hose to a threaded
3/4" connector and make sure that it is fastened tightly
Refill rinse aid
9
Refill salt
GB-7