Always Use Common Sense; Work Safety; Work Area Safety; Personal Safety - Husqvarna MS 360 G Manuel D'utilisation

WARNING! Unauthorized modifications
!
and/or accessories may lead to serious
injury or death to the user or others.
Do not modify this product or use it if it
appears to have been modified by others.
Never use a machine that is faulty. Carry
out the safety checks, maintenance and
service instructions described in this
manual. Some maintenance and service
measures must be carried out by trained
and qualified specialists. See
instructions under the heading
Maintenance.
Always use genuine accessories.
Your warranty may not cover damage or liability caused by
the use of non-authorized accessories or replacement
parts. Contact your dealer for more information.

Always use common sense

It is not possible to cover every conceivable situation you
can face. Always exercise care and use your common
sense. If you get into a situation where you feel unsafe,
stop and seek expert advice. Contact your dealer, service
agent or an experienced user. Do not attempt any task
that you feel unsure of!

Work safety

Work area safety

WARNING! Keep unauthorised persons
!
at a distance. You are responsible to
ensure that animals and onlookers are
not within the working area.
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• People and animals can distract you causing you to
lose control of the machine. For this reason, always
remain concentrated and focused on the task.
• Do not use the machine in bad weather, such as
dense fog, heavy rain, strong wind, intense cold, etc.
• Never start to work with the machine before the
working area is clear and you have a firm foothold.

Personal safety

• Never use the machine if you are fatigued, while under
the influence of alcohol or drugs, medication or
anything that could affect your vision, alertness,
coordination or judgement.
• Check that no tools or other objects have been left
lying on the machine.
• Never allow anyone else to use the machine without
proper training.
14 – English
OPERATING
• Always shut off the machine during longer work
breaks.
• Never work alone, always ensure there is another
person close at hand.
• Learn how to use the machine and its controls safely
and learn to how to stop quickly. Also learn to
recognize the safety decals.
• Keep handles dry, clean and free from oil and grease.
• Do not overreach. Keep proper footing and balance at
all times.
• Never stand on the machine.
• Stand upright. Keep distance between your face and
the cutting blade. Place both hands on the work piece
as far away from the cutting blade as possible. If
plunge function is used is one hand placed on the
cutting handle.
Use and care
• This machine is designed and intended for cutting tile
and stone. All other use is improper.
• Experience is very important when running the
machine. A skilled worker is highly recommended.
• The machine is intended for use in industrial
applications by experienced operators.
• Check that the machine is assembled correctly and do
not show any signs of damage.
• Always perform daily maintenance before starting the
engine. See instructions in the section "Maintenance".
• Do not overload the machine. Overloading can
damage the machine.
• The blade shall be intended for the material to be cut.
• If you are uncertain of what blade to use contact your
local service dealer.
• Keep tools sharp and clean in order to enable safer
work.
• Keep all parts in good working order and ensure that
all fixtures are properly tightened. Replace all worn or
damaged decals.