Posture Belt - Invacare Action 1 NG Manuel D'utilisation

C. Posture belt
22
1.The posture belt is mounted on the back frame
(picture 24 & detail C).
2. Check that the posture belt on the wheelchair is correctly
fastened.
If posture belt on the wheelchair is missing we recommend
C
that the user should transfer to the seat of the vehicle, if
possible.The posture belt should be used in addition to but
never as a substitute for an approved passenger restraint
system (3-point belt).
D. Fastening of 3-point belt (vehicle safety belt device).
Although all three points may be anchored to the vehicle
floor, the diagonal belt passing over the users shoulder should
be routed through a point above and behind the seated user
EN14
which is fixed to the vehicle sides, before passing down to
23A
the floor.The 3-point belt should not be kept from the user's
body by the parts of the wheelchair.
Note; Remove the neckrest if so equipped, its is not designed
A
or tested to be used as a head support in a vehicle.
A
24
23B 23C