9. Press the Hold button to advance to the next screen
parameter.
• Heat temperature is displayed (60°F
to 85°F) / (15°C to 29°C).
Note: Transitions required after 11:59
PM must be programmed in the next
days MORN period.
10. Press the
11. Press the Hold button to advance to
the next screen.
• Cool temperature is displayed
(60°F to 85°F) / (15°C to 29°C).
12. Press the
13. Press the Hold button to advance to the next screen.
Repeat steps 1–13 to program each day of the week
individually.
Note: When programming is complete, slide the Function
switch to Heat or Cool to exit Programming Mode.
49-5000517 Rev. 3
or
button to adjust heat set temperature.
or
button to adjust cool set temperature.
HEAT
:
AM
DAY
PROG
MORN
COOL
:
AM
DAY
PROG
MORN
15