GE RAK149P2 Manuel Du Propriétaire Et Instructions D'installation page 14

Programming
Program Overview
The programmable thermostat has four periods (MORN,
DAY, EVE, NITE) that are customizable for each day of the
week. Each period will have a set time, heat temperature and
cool temperature. The thermostat monitors the day and time,
while maintaining the specific conditions that you have chosen
for each period in the program.
Note: Operation being set will blink in the display.
1. Place the Function switch in the
Off position.
2. Press the Hold button in
for 6 seconds.
3. Press the Hold button 3 times.
• DAY (01–07) and PROG is displayed.
4. Press the
the day you want to program (01-05 =
Monday – Friday individually, 67 = program Saturday and
Sunday at the same time, 17 = program every day of the
week at the same time, 15 = program Monday – Friday at
the same time).
5. Press the Hold button to advance to
the next parameter.
• Period is displayed (MORN, DAY,
EVE, NITE).
Note: You can always press the Mode
button to return to the previous parameter.
6. Press the
display should blink the period of the
day.
7. Press the Hold button to advance to
the next parameter.
• Set time is displayed.
8. Press the
Hold button once, and then press the
to adjust minutes.
14
or button to change
or button to change period of day. The
or button to adjust hours. Press the
DAY
PROG
DAY
PROG MORN
:
AM
PROG MORN
or buttons
49-5000517 Rev. 3