Operating Functions - GE RAK149P2 Manuel Du Propriétaire Et Instructions D'installation

Operating functions

Off
• In this mode, the thermostat will
not turn on the heating or cooling devices
(manual fan can operate).
• Off is also used to access Setup
and Program modes.
Cool
• In this mode, the thermostat controls the
cooling system.
• Press the Mode button to enter and exit
the Program Cool mode.
• In Program Cool mode (PROG displays), the thermostat
will follow the program schedule that is stored in memory.
Heat
• In this mode, the thermostat controls the
heating system.
• Press the Mode button to enter/exit the
Program Heat mode.
• In Program Heat mode (PROG displays), the thermostat
will follow the program schedule that is stored in memory.
Hold
• When in Programmable Cool or Programmable Heat,
you
can lock in the present settings indefinitely by pressing
the Hold button once (PROG flashes). Press Hold button
again to leave Hold mode (PROG solid). For a temporary
Hold period, raise or lower set temperature to desired set
temperature.
The thermostat will automatically return to programmed
set temperature after 2 hours.
10
:
PM
OFF
COOL
:
PM
PROG
HEAT
:
PM
PROG
49-5000517 Rev. 3