AVO MEGGER BM25 Guide De L'utilisateur page 26

Results Displayed at end of each test
IR Test
Default test time 30 minutes.
Timer Digital Indicator
Test Duration
Test Duration
Test Duration
Test Duration
Note: A capacitance value reading is only available if the test
has run for more than one minute, and provided the reading was
not over-range.
26
Voltage Indicator
Blank Final test voltage
R Final test voltage
Final test voltage
I
µF Final test voltage
Appendix 1
PI Test
Default test time of 10 minutes. Terminating the test prematurely
still allows the test results to be calculated and displayed.
Timer
T3
Test Duration
T2 time
T3 time
T1 time
T2 time
T3 time
T3 time
Note: A capacitance value reading is only available if the test
has run for more than one minute, and provided the reading
was not over-range.
Digital Indicator Voltage Indicator
Blank Final test voltage
PI (T1 to T2) Voltage at T2 time
PI (T2 to T3) Voltage at T3 time
R at T1 time Voltage at T1 time
R at T2 time Voltage at T2 time
R at T3 time Voltage at T3 time
µF Voltage at T3 time
Other
PI cursor
flashes
PI cursor
flashes