Functional Description; Commissioning - Festool PLANEX easy LHS-E 225 EQ Guide D'utilisation

The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. While reading the manual you can fold out
the page for comparison and quick reference.
[1-1] Sanding head
[1-2] plug it mains cable
[1-3] On/Off switch
[1-4] Extractor connector
WARNING
Unauthorised voltage or frequency!
Risk of accident

The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.

In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.

Connecting and disconnecting the mains cable -
[2]
2
2

Functional description

1
2
1
[1-5] Plug it-connection
[1-6] Suction sleeve stop
[1-7] Speed control
[1-8] Detachable brush segment
[1-9] Insertion tool/sanding pad
[1-10] Gripping surfaces

Commissioning

Before switching on the power tool, make
sure that the bayonet fitting at the mains ca-
ble is closed fully and locked.

To connect the suction hose [3], see also Sec-
tion Dust extraction.
Using a special vacuum sleeve, the P L A N E X
suction hose guarantees a permanent fixing
and better protection against kinking.
3
ON/OFF button [4]
ON (I) Push the on/off switch [4-1] down and
forward.
On/off switch is locked.
11